Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

OPERATOR'S MANUAL
26-in 4-DRAWER CHEST
MODEL # TR2808THD
SERVICE PARTS
IN THE UNITED STATES CALL 1-800-833-4405
FOR SERVICE PARTS. Outside the United States call your local
distributor. Please provide the Model Number when calling.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
CAPACITIES
• The maximum weight for each drawer should be
no more than 25 lbs.
• Empty weight of the unit is 35 lbs.
• The maximum product weight, including contents,
should be no more than 160 lbs.
MAINTENANCE
Ball bearing
• Lubricate the slides with grease or equivalent,(twice yearly.)
• Lubricate lock with graphite, (yearly).
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax
Waterloo Industries, 139 West Forest Hill Avenue, Oak Creek, WI 53154
Friction slides
as to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard
cleaning fluids. For safety, use a nonflammable cleaning fluid.
• If drawer liners are supplied, it is recommended they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned
with soap and water
DANGER
is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING
indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DANGER
• DO NOT stand on this product. You may fall or cause
product to tip.
• DO NOT open more than one drawer. The product may
become unstable and tip.
• DO NOT step in the drawers. You may fall or cause
product to tip.
• DO NOT mount this product on a truck bed or any other
moving object.
• DO NOT move the product prior to closing
and locking all the drawers. The drawers could come open
and make the product unstable and tip.
WARNING
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving
• USE THE BRAKES when not moving this product. This will
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift, or
to be towed with any mechanical devices.
• The maximum weight for each drawer should never be exceeded.
• Only transport this product empty. Properly secure when transporting.
• DO NOT exceed maximum product weight, including contents.
See Capacities for more information.
PTS-005282-052810
SAFETY
F1769

Publicidad

loading

Resumen de contenidos para Husky TR2808THD

  • Página 1 The drawer liners may be cleaned with soap and water 26-in 4-DRAWER CHEST MODEL # TR2808THD SAFETY DANGER is used to indicate a hazardous situation which, if not avoided, will result in serious injury or death.
  • Página 2 Lever Style - Lift or lower (depending on the slide) the ASSEMBLY release lever on both sides, (this allows the slides to ride MOUNTING CHEST ON CABINET over the stops.) Pull out to remove. Items Needed: Chest Cabinet Process: • Empty contents of the chest. •...
  • Página 3 INSTALLING DRAWERS Ball bearing slide - Pull slides and slide carrier out to fully extended position (see illustration.) Hold the slide on the cabinet while aligning it with the slide on drawer. Slightly insert one side and repeat for the other side. Slowly push drawer to its fully closed position to engage slide.
  • Página 5 Los forros para gavetas pueden limpiarse con agua y jabón. BAÚL DE 66 CM CON 4 GAVETAS MODELO NO # TR2808THD SEGURIDAD PELIGRO se utiliza para indicar una situación pelig- rosa que, de no evitarse, resultará...
  • Página 6 Estilo palanca – Levante o baje (dependiendo de la corredera) ENSAMBLAJE la palanca de liberación en ambos lados (esto permite que las PECHO DEL MONTAJE EN EL GABINETE correderas pasen sobre los topes.) Jale hacia afuera para retirar. Elementos necesarios: Baúl Gabinete Proceso:...
  • Página 7 INSTALACIÓN DE GAVETAS Correderas de rodamientos esféricos - hale hacia afuera las correderas y el soporte de las correderas hasta que queden en posición totalmente extendida (ver ilustración). Sostenga la corredera en el gabinete mientras lo alinea con la corredera de la gaveta.