Publicidad
Idiomas disponibles
Idiomas disponibles
ENERGIZER SOLAR PEAK 2500
1 portable power station and 1 expansion battery pack in parallel mode
1.
Turn off the power station and expansion batteries before being paralleled.
2.
The parallel connection cable is plugged into the expansion port of the portable power station and the Power Output
of the expansion battery pack.
3.
After the parallel connection is completed, press the switch button
parallel power station and the expansion battery pack to display the current capacity. When the power station shows
the paralleled quantity, then the parallel capacity expansion has been successful.
4.
After the parallel connection is completed, connect the corresponding outlet of the portable power station to charge
or discharge (refer to the Energizer Solar Peak 3000 Power Station User Manual).
Connect to
Power-Output
socket
Power - Input
1 portable power station with multiple expansion battery packs in parallel
1.
Turn off the power station and expansion batteries before being paralleled.
2.
The parallel connection cable is plugged into the expansion port of the portable power station and the Power
Output of Expansion Battery Pack#1, the Power Input of Expansion Battery Pack#1 is connected to the Power Output
of Expansion Battery Pack#2, the Power Input of Expansion Battery Pack#2 is connected to the Power Output of
Expansion Battery Pack#3, and so on for up to six expansion battery packs in parallel.
3.
After the parallel connection is completed, press the switch button
the parallel portable power station. The expansion battery pack will display the total capacity level including the
additional expansion batteries and the number of expansion batteries in use.
4.
After the parrallel connection is completed, connect the corresponding outlet of the portable power station to charge
or discharge (refer to the Energizer Solar Peak 3000 Power Station User Manual).
Expansion
battery pack
Connect to
Power-Input
socket or Power
Station
Power - Output
Remark
There are + and - symbols on battery packs and cables in case of reverse polarities
of the portable power station to activate the
Connect to
Power-Output
socket
For external power supply
on the portable power station to activate
8
Portable
power station
ENGLISH
Publicidad
