Publicidad
Idiomas disponibles
Idiomas disponibles
8.
Remove belt from trimmer head pulley.
9.
Note the position of the control cable
and idler return spring, then remove
idler assembly from chassis and
remove belt and idler from trimmer.
10. Remove belt from idler assembly by
removing bottom belt keeper and idler
pulleys.
11.Assemble
new belt, idler pulleys and
bottom belt keeper to idler bracket.
Tighten pulley bolts securely.
NOTE: Be sure belt is inside top belt
keeper on idler assembly.
12. Position
belt and idler assembly in
trimmer, reconnect idler spring and
assemble
idler to chassis.
13.Install
belt around trimmer head pulley
and engine pulley.
14. Replace
debris shield and tighten the
four (4) screws securely.
15. Replace
chassis cover and tighten
screw securely.
Always use Craftsman
replacement
parts
to assure proper fit and long life.
Idler bracket
Spacer,
Flatidler
BoSom
belt
keeper
Flat idler
2
Trimmer head pulley
ENGINE
ENGINE
SPEED
Your engine speed has been factory
set.
Do not attempt to increase engine speed
or it may
result in personal
injury.
If you
believe
that the engine
is running too fast
or too slow, take your unit to a Sears or
other qualified
service
center for repair
and/or
adjustment.
CARBURETOR
Your carburetor
has a nonadjustable
fixed
main jet for mixture
control.
If your engine
does not operate
properly
due to sus-
pected
carburetor
problems,
take your
unit to a Sears or other qualified
service
center for repair and/or
adjustment.
IMPORTANT:
Never tamper with the
engine governor,
which is factory
set for
proper engine speed.
Overspeeding
the
engine above the factory
high speed
setting can be dangerous.
If you think the
engine-governed
high speed needs
adjusting, take your unit to a Sears or
other qualified service center, which has
proper
equipment
and experience
to
make any necessary adjustments.
14
Publicidad
