Xblitz Night 2 Manual Del Usuario página 17

and memory card.
10. Default settings - restores the device to its factory settings.
07. MOBILE APPLICATION
The Xblitz Night 2 camera, thanks to its built-in Wi-Fi module, also has the
ability to control and playback recordings via a mobile app called DashGo.
The software can be downloaded from the Play Store (Android), App Store
(iOS) or by scanning the QR code on the box.
Connecting to the app: Make sure your camera is switched on and has Wi-Fi
activated. Launch the app, add your device and search for a Wi-Fi network
on your phone, the device Wi-Fi network name is: Xblitz Night 2 and the
default password is 12345678 Once the device is successfully connected to
the app, a screen will appear on the camera display informing you that you
can control the camera via the app (it is not possible to control the camera
manually with buttons at this time). You can then manage the settings
yourself or view and save recordings to your phone's memory.
Note: only one device can be connected to the network when using the
camera.
Note: after disconnecting the device from the phone and mobile app, it
is necessary to manually deactivate the Wi-Fi module by holding down
the „up" button for approximately 2 seconds so that the camera can be
controlled again.
08. PRECAUTIONS
1. Do not disassemble or tamper with the camera yourself. In the event
of a malfunction, contact the service department.
2. Use only original accessories.
3. Use only the original power supply unit included in the kit.
4. The device may not be used in contravention of the laws of your
country or region.
5. Permissible operating temperatures are 0 - 35°C. Storage: +5 to +
45°C. Humidity: 5-90% non-condensing.
6. Do not subject the device to damage or physical impact.
7. Take care of the cleanliness of the product, especially the lens. Do not
use detergents or chemicals when cleaning.
8. Clean only when the unit is unplugged.
9. Keep the device out of the reach of children.
10. Do not expose the device to very high temperatures or fire.
11. If you smell burnt plastic or electronics from the camera, unplug the
unit as soon as possible and contact the service department.
17