THOMSON THFP914C Manual De Usuario página 34

Important
Check that the base of the
•
heating blender is clean
before each cycle.
Always fill the stainless steel
•
bowl above the fill line min.,
While making sure not to
exceed the max mark.
Exceeding the maximum fill
line. Can activate the overflow
sensor, causing the stop of the
heating blender and prevent
the hot liquid spray during
operation.
Never connect the heating
•
blender sector as the
ingredients have been added.
Do not use the blender when
•
heating stainless steel bowl is
empty.
Never allow liquid into the
•
fitting on the underside of the
lid. If liquid is accidentally
spilled on the fitting, dry it
EN-7