Descargar Imprimir esta página

Kasanova KOE000049NOC Manual De Instrucciones página 12

Ventilador calefactor sin aspas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

BLADELESS FAN HEATER
12
Once the desired temperature has been selected, the display (2) will
show the room temperature after a few seconds.
In automatic mode, the device will automatically regulate the heating power based on the differen-
ce between the room temperature and the set temperature. In this operating mode, the device will
also switch between the various power levels (ventilation, low power, high power) repeatedly. The
selected power level is always shown on the display. Once the set temperature has been reached,
ventilation will still remain active in order to monitor the room temperature more effectively.
To disable this function, press the "MODE" button and manually select the desired function (venti-
lation only, low power or high power).
MAINTENANCE
Disconnect the plug from the socket and let the appliance cool down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
TO CLEAN THE FILTER:
Press the clips (5), gently remove the back grill by pulling it outwards, remove the filter and clean it
using a soft slight damp cloth then replace in the appliance and reseal the back grill.

Publicidad

loading