Publicidad
Idiomas disponibles
Idiomas disponibles
Opening your life
Installation (steel track)
Figure 6
1) Fixing the track bracket to the wall 2cm-15cm over the shaft or intermediate bracket (depending on the actual installation
space).
2) Fixing the steel track to the wall bracket with axis pin. (Figure 6)
3) Fixing garage door opener to the track by U bracket. It´s enough for 2Nm fastening force.
4) Fixing the opener on ceiling by hanging bracket.
Notice: Make sure the track is horizontal and vertical to the shaft. Make sure the connection of hanging bracket and ceiling
is rm enough.
5) Fix the clutch cord.
6) Release the clutch, try to open and close the door by hand. Make sure there is no resistance between door panel and track.
7) Connecting the opener with power and adjusting the operation.
Notice: Make sure the opener s voltage is in accordance with the local voltage. Connect the opener to a properly earthed
power supply.
5
Publicidad
