Opening your life
Maintenance
1) No particular maintenance is required for the logic circuit board.
Check the door at least twice a year if it is properly balanced, and all working parts are in
good working condition or not.
Check the reversing sensitivity at least twice a year, and adjust if it is necessary.
Make sure that the safety devices are working e ectively (photo beams, etc.)
Notice: A rude operating door can a ect the life of the automatic opener due to incorrect loads, and will void the warranty.
Final notes
This manual is only used by technical persons who are quali ed to carry out the installation.
No given information in this manual can be considered of any interest to the end user.
It is important for the installer to show their clients correct operation using of the opener including the using of manual
disengagement cord.
Inform the owner about the need of a regular and accurate maintenance, especially regarding a regular check of the safety
and reversing devices
Important information for the user
Once the opener has been installed, the user must be informed about how it works and all the risks that can arise if it is used
improperly. The user must avoid placing himself/herself in dangerous situations such as standing within the door s opera-
ting range when it is moving.
Do not let children play near the door, and keep the remote controls out of their reach.
All services, repairs or checks must be carried out by professionally quali ed persons, and noted on a maintenance register
kept by the user.
IMPORTANT NOTE: In the case of a malfunction the user must call an authorized installer and should not attempt to repair
it by yourself.
Speed setting
Four levels of speed can be adjusted 70%, 80%, 90% and 100%.
13
1