Cub Cadet 450 Serie Manual Del Operador página 17

Troubleshooting
Problem
Tines do not engage
Tines skip over ground
Wheels do not engage
Cause
1. Foreign object lodged in tines.
2. Tine clevis pin(s) missing.
3. Pulley and idler not in correct adjustment.
4. Not shifting properly.
5. Control cable not adjusted properly.
6. Belt worn and/or stretched.
1. Improper rotation.
1. Nut and bolt missing
2. Tiller is not being shifted properly.
3. Control cable not adjusted properly.
4. Belt worn and/or stretched.
Remedy
1. Dislodge foreign object.
2. Replace tine clevis pin(s).
3. Take tiller to authorized service dealer.
4. Refer to the Operation Section for proper
shifting procedures.
5. Adjust control cable
6. Replace belt.
1. Forward rotation should only be used on soil
that has already been tilled, not on virgin soil.
1. Replace nut and bolt.
2. Refer to Operation Section for proper shifting
procedures.
3. Adjust control cable
4. Replace belt.
8
17