Descargar Imprimir esta página

Nexgrill 820-0007GE Manual Del Propietário página 7

Parrilla portable de gas de acero inoxidable

Publicidad

Idiomas disponibles

Idiomas disponibles

GAS HOOK-UP
Only the pressure regulator and hose assembly supplied with the grill should be used. Any replacement pressure regulator
and hose assembly must be specified by the grill manufacturer. This grill is configured for liquid propane. Do not use a
natural gas supply.
Total gas consumption (per hour) with all burners set on "HIGH":
EACH BURNER
TOTAL
The installation of this appliance must conform with local codes or, in the absence of local codes, with either the National
Fuel Gas Code, ANSI Z223.1/NFPA 54, National Gas Propane Installation Code, CSA B149.1, or Propane Storage and Handling
Code, B149.2,or the Standard for Recreation Vehicles, ANSI A119.2/NFPA 1192, and CSA Z240 RV Series, Recreation Vehicle
Code, as applicable.
A dented or rusty liquid propane cylinder may be hazardous and should be checked by your
supplier. Never use a cylinder with a damaged valve. The liquid propane cylinder must be
constructed and marked in accordance with the specifications for liquid propane cylinders by
the United States Department of Transportation (DOT) or the National Standard of Canada, CAN/
CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods Commission.
The 9 kg (20 lb) cylinder must have a shut-off valve terminating in a valve outlet specified, as
applicable, for connection type QCC1 in the standard for compressed gas cylinder valve outlet and
inlet connection ANSI/CGA-V-1.
Storage of an outdoor cooking gas appliance indoors is permissible only if the cylinder is
disconnected and removed from the outdoor cooking gas appliance. The cylinder system must be
arranged for vapour withdrawal. The cylinder must include a collar to protect the cylinder valve.
Manifold pressure: (operating) 27.9 cm (11 in) water column, (non-operating) 28.4 cm (11.2 in) water
column.
The liquid propane cylinder must be fitted with an overfill protection device (OPD).
If fitted, remove the plastic valve cover from the liquid propane cylinder. Make sure the grill's
gas hose does not contact the grease pan or grill firebox when the liquid propane cylinder is
positioned.
WARNING:
NEVER ATTEMPT TO USE DAMAGED OR OBSTRUCTED EQUIPMENT. SEE YOUR LOCAL LIQUID PROPANE
DEALER FOR REPAIR.
REPLACING THE LIQUID PROPANE CYLINDER
Turn the grill burner knobs clockwise to "OFF" () and make sure the grill is cool.
Turn the liquid propane cylinder valve to the CLOSED position by turning clockwise
until it stops.
Detach the regulator assembly from the cylinder valve by turning the
quick-coupling nut counterclockwise.
Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only
install the type of dust cap on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plugs may result in leakage of propane.
10,000 BTU/HR.
20,000 BTU/HR.
CONNECTION INSTRUCTIONS
LIQUID PROPANE CYLINDER REQUIREMENTS
CONNECTING THE LIQUID PROPANE CYLINDER
9 KG (20 LB) CYLINDER
6

Publicidad

loading

Este manual también es adecuado para:

2127633