Publicidad
Idiomas disponibles
Idiomas disponibles
EyeMag Smart
G-30-2091, 1.4
Attaching the sterilizable contact guard
The sterilizable contact guard enables sterile use of the
head-worn loupe.
It must be sterilized before each use. This also applies to the
first use after delivery. You'll find further information about
sterilization in the enclosed instructions for use entitled "G-
30-1560".
•
Slide the already sterilized contact guard from front to
Fig. 10
back onto the telescopic slide until you hear the con-
tact guard snap into place (fig. 10).
WARNING!
Risk of infection!
•
Do not touch any unsterile surfaces.
If you can no longer ensure that the sterilizable
contact guard is sterile, have another person op-
erate the flip-up function.
Removing the sterilizable contact guard
Fig. 11
•
Press down on the release tab on the sterilizable con-
tact guard (see arrow).
•
Pull the sterilizable contact guard to remove it from the
telescopic slide (fig. 11).
Preparations for use
35
Publicidad
