TataWay PROMETEO Manual De Uso página 10

3.Push the child car seat firmly against the backrest of the car seat with the button pressed (p) to make
sure that it adheres per fectly to the car seat.
WARNING! The back of the child car seat must closely adhere to the car seat.
4.Place the child in the seat with their back leaning against the backrest.
5.Insert the diagonal portion of the car seat belt in the diagonal belt guide (Fig. 7).
6.Fasten the vehicle seat belt by passing the waist part through the seat Belt
WARNING! Check that the vehicle safety belt is tightened properly.
WARNING! Check that the vehicle safety belt is free of knots (Fig. 8).
WARNING! Check that the diagonal seat belt fits correctly across your child's shoulders (Fig.
9) and does not press on the their neck; if necessary, adjust the height of the backrest
WARNING! Check that the car seat belt ad juster is reclined or at least aligned with the car seat
backrest.
WARNING! When the child car seat is not in use, it should always be left secured with the Isofix con-
nectors to the car seat or stowed in the boot. In fact, an unsecured Car seat maypose a hazard to the
passengers in case of acci dent or sudden braking.
To remove the child from the child car seat, simply unfasten the buckle of the car safety belt, accom-
panying the belt during rolling.
INSTALLINGTHE CHILD CAR SEATWITH THE VEHICLE SEAT BELT
WARNING!The text and figures of these in structions are for the installation of the child car seat on the
correct back seat. When fitting the child car seat in other position these oper ations should in any case
be carried out in the same order.
WARNING! The seat MUST ALWAYS be in stalled with the vehicle seat belt.
WARNING! Check that the car seat headrest does not interfere with the headrest of the child car seat:
it must not push it forward (Fig.3). If this happens, remove the headrest from the car seat. Remember
to reposition the head rest on the vehicle seat if the child car seat is removed and the seat is used by
a passenger.
1.Position the child car seat NOT reclined and with the connectors NOT pulled out against the backrest
of the car seat (Fig. 10)
WARNING! The back of the child car seat must closely adhere to the car seat.
2.Place the child in the seat with their back leaning against the backrest. Check the height of the
backrest.
3.Insert the diagonal portion of the car seat belt in the diagonal belt guide (Fig. 9).
4.Fasten the vehicle seat belt by passing the waist part through the Belt Positioner (G) (Fig. 12).
5.Pull the diagonal part of the belt upwards so the entire belt is taut and fi closely over the child's .
WARNING! Check that the vehicle safety belt is tightened properly.
WARNING! Check that the vehicle safety belt is free of knots (Fig. 8).
WARNING! Check that the diagonal seat belt fits correctly across your child's shoulders (Fig.
11) and does not press on the their neck.
WARNING! Check that the car seat belt ad juster is reclined or at least aligned with the car seat
backrest
WARNING! Make sure that your child is cor rectly secured in the child car seat, so that he does not
slide forward.
WARNING! Check that the unused Isofix rigid connectors are not pulled out.
WARNING! When the child car seat is not in use, it should always be left secured with the 3-point belt to
the car seat or stowed in the boot. In fact, an unsecured car seat may pose a hazard to the passengers
in case of accident or sudden braking.
To remove the child from the child car seat, simply unfasten the buckle of the car safety belt, accom-
panying the belt during rolling.
Dismantle the child safety seat
Dismantle the seat: press the buttons on the ISOFIX and stow back the connector. Pick up the child
safety seat and loosen the string of the cover. Remove the cover from the seat.
The way of washing the cover:
10