Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE USE
IMPORTANT: the blades on your knife are very sharp. Always handle
them with care, keeping sharp edges away from your hands, hair and
body.
Assembling the blade
Hold blades by the non-serrated ends with the plastic guards on either
side. Make sure that the serrated edges are on the same side. Slide the
rivet of the blade into the keyhole slot on the other blade.
NOTE: There are two sets of blades, a serrated blade and a fillet blade,
as mentioned in the PARTS DESCRIPTION section. Make sure to use the
matching blades for the desired function.
Connecting the blade
Hold the assembled blades by the plastic guard in one hand (serrated
edges facing down) and the motor unit / handle in the other hand.
Carefully insert the blades (serrated edges facing down) into the slot on
the handle with the blade release button and safety switch facing
upwards. Push gently until they click securely.
Clean the appliance
-
Remove any dirt and dust from your knife before its first use.
-
Clean the handle with a damp cloth.
-
Wash the blades separately with hot, soapy water.
-
Dry all parts thoroughly.
www.KALORIK.com
Rivet and keyhole slot
5
EM 51426 GR – 200605
A200106
Publicidad
