GB
Accessories overview
Accessories
Universal floor nozzle
Suction tube
2in1 crevice nozzle
Textile brush
Soft brush
Accessory holder
Use
WARNING!
DANGER OF EXPLOSION
1. Connect the vacuum cleaner to a working power socket. Do not pull the cable out of the main unit further than the
red mark.
2. Press the on/off button on the main appliance to switch on the vacuum cleaner. The appliance starts automatically
with high suction power.
3. During use, the vacuum cleaner can be controlled either via the control buttons on the main appliance or via the
infrared remote control on the handle.
16
Instruction manual
Image
Use
For vacuuming surfaces
The bristle strip on the underside can be
folded out using the foot lever, e.g. for
vacuuming carpets. Pressing the lever
again lowers the bristle strip back into the
floor nozzle. You can use the slider at the
top of the nozzle to adjust the distance
between the floor nozzle and the floor.
For use with the floor nozzle
Length can be adjusted in stages by pressing
the release button on the outer tube.
With adjustable brush attachment. For
cleaning narrow and difficult to reach
nooks and crannies.
For cleaning upholstery, mattresses, etc.
For dusting surfaces.
Can be attached to the suction pipe for
space-saving storage of accessories.