Publicidad
Idiomas disponibles
Idiomas disponibles
*This picture is for use only, please refer to the actual machine you purchased.
5. When you finis your clean job, release the trigger and turn the switch to" OFF/O" position, then turn off the water supply.
Note: When not in use, make sure Lock-off switch is in" Lock" position.
Note: when using pressure washer after water supply off, serious damage could occur to the pump and / or motor.
Warning: never disconnect high pressure discharge hose from machine while system is pressurized. To depressurize, turn motor off, turn
water supply off and squeeze gun trigger 2-3 times.
6. Unplug the power cord from the power outlet.
Warning: Check that the supply voltage and frequency correspond to those specified on the appliance data plate. The appliance should only
be connected to a mains power supply via a security breaker (Max.30mA) to cut off the electricity supply in the instance of a short circuit.
INFORMATION FOR USAGE
1. Safety valve and/or pressure limiting valve
I
Warning-danger!
Do not tamper with or adjust the safety valve setting.
The safety valve is also a pressure limiting valve. When the gun trigger is released, the valve opens, pressure switch action, the machine
automatically shut down.
If the gun nozzle is blocked, will cause the machine pressure rises, the safety valve opens, the pressure switch action, the machine auto-
matically shut down, you can refer to the following to use a needle to clean the nozzle.
2. The safety button of gun
The operator need press the unlock button and then actuate the trigger to do the spray operation. When you release the trigger, it can
return to the off position automatically.
When not using the pressure cleaner, press the lock button to keep from accidentally engaging the high pressure spray.
Adres producenta/ Adresse des Herstellers/ Manufacturer's Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
25
Publicidad
