resideo RML10-STD Manual De Instrucciones página 18

3 Operation
3.1 Operating elements
A
B C
I
J
3.2 Switching RML10-STD on or off
1. Press the PWR button for 2 seconds.
You hear a short beep.
P
If the RML10-STD is switched on: The PWR LED starts flashing green.
P
If the RML10-STD is switched off: The PWR LED stops flashing (off).
P
3.3 Restarting RML10-STD
1. Press the PWR button for 10 seconds.
The RML10-STD will shut down and restart.
P
3.4 Battery
Charging the battery
1. Connect the RML10-STD to a USB charger or to a USB host.
The power delivery option of the USB host must be enabled.
■
Use the supplied USB cable.
■
The RML10-STD supports USB Type-C BC1.2 charging mechanism with "Fast charge" feature.
■
The RML10-STD can be turned on and is fully operational even while charging.
■
13.02.2023
A) Antenna
B) PWR
C) PWR button (device on/off)
D) Infrared interface
E) BLE
D
F) BLE button (Bluetooth on/off)
E
G) LED (activity indicator for Infrared)
H) button (programable)
F
I) USB socket (type-C)
J) Attachment for neck strap
PWR = Power,
1)
not included in delivery
3)
G
H
RML10-oi-en1h2602GE23R0223
LED (indicator for device status and battery charging)
1)
LED (activity indicator for Bluetooth and USB)
2)
3)
BLE = Bluetooth Low Energy,
2)
Operation | EN
18