resideo RML10-STD Manual De Instrucciones página 21

Positioning of the RML10-STD
A
B
(A)
IR interface
RML10-STD
Distance between (A) and (B) maximum 15 cm.
3.8 Retrofiting E53205 programming adapter
The programming adapter for E53205 is by default intended for use with the WFZ.IrDA-USB. To use the
programming adapter with the RML10-STD, the positioning guide of the programming adapter must be replaced.
Warning
Carry out the following steps very carefully! There is a risk that the retaining bars or the positioning
guide will break off.
B
A
A
1. Remove the O-rings (A).
2. Remove the positioning guide for the WFZ.IrDA-USB (B).
3. Mount the positioning guide for the RML10-STD (C).
The guide nose of the positioning guide (D) must point upwards.
■
4. Mount the O-rings (A).
13.02.2023
A
B
(B)
IR interface
measuring device
A
D
RML10-oi-en1h2602GE23R0223
A
C
Operation | EN
21