Create Speaker Fire Manual De Instrucciones página 12

Warnings:
• Never add bioethanol to a hot or lit fireplace
• Make sure the burner tank has cooled completely before lighting.
• Never re-ignite remaining bioethanol.
SW ITCH E D ON
1. Lift the glass cover off the base. Use a glove to prevent burns.
2. Place the glass cover on a suitable heat resistant surface.
3. Use the narrow side of the extinguishing hook to pry the reservoir out of the burner. If there
are still traces of bioethanol in the burner tank, dispose of them in a sealable container.
4. Check whether fuel has been spilled into the safety tank before refilling. If you find excess
fuel, dispose of it in a sealable container.
5. Place the second burner in the base safety tank.
6. Fill the burner tank with bioethanol up to the maximum indicator. It is recommended to use
a funnel for this. Never fill the device above the maximum indicator.
7. Before turning on the appliance, remove any excess.
8. Light the burner with a stick lighter, do not leave it on the fireplace while lighting. Maintain
a sufficient safety distance to avoid burns.Place the glass cover on the base. Use gloves
to avoid burns.
• The fuel doesn't burn very hot at first. Wait 5 minutes until the flame reaches optimal
height.
E TH AN OL E LI MI NATI O N
• Never dispose of bioethanol in the environment.
• Do not pour bioethanol waste into the sewer.
• Dispose of bioethanol in accordance with local hazardous substance regulations.
• Dispose of the completely emptied product following local regulations.
• Disassemble all parts of the product.
• The glass cover of the appliance may darken during use.
• Regularly clean the product parts with a soft, damp cloth in warm water with a neutral PH
cleaning soap.
• Do not use chemical additives for cleaning.
• Do not use materials that may scratch surfaces.
• Do not clean the tempered glass cover in the dishwasher.
12 E NGL I SH
RECHARGE AND POWER ON
MAINTENANCE