Publicidad
Idiomas disponibles
Idiomas disponibles
ADJUSTMENT GUIDE
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride,
you must ensure that the recumbent elliptical is
stable and secure. If you notice that the recumbent
elliptical is unbalanced during use, you should adjust
the Rear End Caps (No. 56) located on the rear
stabilizer until the recumbent elliptical becomes
levelled with the floor surface.
ADJUSTING THE SEAT
To move the Seat (No. 52) forward or backward,
while seated on the recumbent elliptical, put your
feet on the floor. Shift the Adjustable Handle (No.
13) down to loosen. Adjust the Seat (No. 52) to your
desired position, then shift the Adjustable Handle
(No. 13) up to secure.
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension
Controller (No. 72a) clockwise to increase the level
of resistance. Rotate the Tension Controller (No.
72a) counter-clockwise to decrease the level of
resistance.
Tension levels are set at Level 1 being the lowest
and Level 8 being the highest.
PEDAL ADJUSTMENT
The pedal strap is adjustable and can be
personalized to fit the user's foot size.
MOVING THE RECUMBENT ELLIPTICAL
Lift the recumbent elliptical by the Rear Stabilizer
(No. 11) until the Transportation Wheels (No. 71)
touch the ground. With the Transportation Wheels
(No. 71) on the ground, you can transport the
recumbent elliptical to the desired location with ease.
11
Publicidad
