LG 49UT640S0DA Guía Rápida De Configuración página 40

* This feature is varied based on the model.
Ack
(a)( )([Set ID])( )(OK)([Data] 00)([Data] 01)
([Data] 02)([Data] 03)([Data] 04)([Data] 05)
(x)(a)( )([Set ID])( )(NG)([Data] 00)(x)
20 Channel [Skip]/[Add] (Command: m b)
► To skip current channel for next time.
Transmission
(m)(b)( )([Set ID])( )([Data])(Cr)
[Data] 00 : Del(ATSC,ISDB)/Skip(DVB)
[Data] 01 : Add
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
* Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
21 Key (Command: m c)
► To send IR remote key code.
Transmission
(m)(c)( )([Set ID])( )([Data])(Cr)
[Data] : Key code - page 21
Ack
(c)( )([Set ID])( )(OK/NG)([Data])(x)
22 Control [Backlight] (Command: m g)
► To control the backlight.
Transmission
(m)(g)( )([Set ID])( )([Data])(Cr)
[Data] Min : 00 to Max : 64
Ack
(g)( )([Set ID])( )(OK/NG)([Data])(x)
32
23 [Input] select (Command: x b) (Main Picture
Input)
► To select input source for main picture.
Transmission
(x)(b)( )([Set ID])( )([Data])(Cr)
[Data] 00 : DTV
[Data] 01 : CADTV
[Data] 02 : Satellite DTV ISDB-BS (Japan)
[Data] 03 : ISDB-CS1 (Japan)
[Data] 04 : ISDB-CS2 (Japan)
[Data] 10 : ATV
[Data] 11 : CATV
[Data] 20 : AV or AV1
[Data] 21 : AV2
[Data] 40 : Component1
[Data] 41 : Component2
[Data] 60 : RGB
[Data] 90 : HDMI1
[Data] 91 : HDMI2
[Data] 92 : HDMI3
[Data] 93 : HDMI4
Ack
(b)( )([Set ID])( )(OK/NG)([Data])(x)
* This function depends on model and signal.
24 Auto Configure (Command: j u)
(Depending upon model)
► To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC)
mode.
Transmission
(j)(u)( )([Set ID])( )([Data])(Cr)
[Data] 01 : To set
Ack
(u)( )([Set ID])( )(OK/NG)([Data])(x)