Maintenance - BH SHIATSU Prince M400 Instrucciones De Montaje Y Utilización

MAINTENANCE

●
TIP
maintenance tasks.
To prevent accidents do not attempt to unplug the chair with wet or damp
hands or clothes.
Do not tug on the mains cable to unplug it.
Maintenance of component parts.
Main body
Use a lightly dampened cloth with a mild cleaning
product to clean the plastic elements and armrests
Dry with a clean dry cloth.
Remote control unit
Use a lightly dampened cloth with a mild cleaning
product to clean the remote control unit
Backrest cushion and pillow
Use a lightly dampened cloth with a mild cleaning
product to clean these elements.
Leave them to dry.
Storage
After cleaning, store the chair in a dry place. Cover
it if it is not going to be used for prolonged periods.
Inspection
Following phenomena
-Burning smell
-Hot electrical components
-Other strange phenomena
Inspection
Unplug the chair from the mains supply before performing any cleaning or
-
Do not use caustic cleaning products or
detergents,
fading, etc.
To avoid accidents do not use moist
products to clean the remote control
unit.
Do not expose the chair to direct
sunlight or high temperatures as this will
cause the surfaces to fade.
In the event of accidents,
Unplug the chair and get in
touch with the Technical
Stop use
Assistence Service
–Do not dismantle any of the
chair components or replace
pieces that are not original
manufacturers parts
24
M400
WARNING
etc. to avoid damage,
WARNING
WARNING