Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Troubleshooting continued
Problem
Possible Causes
Output
Not enough water supply.
pressure
varies
Water inlet screen is clogged.
Nozzle is clogged.
Nozzle has mineral build up
Water
Loose connections.
or Oil
Worn or broken O-rings.
Leaking at
Pump head or tubes damaged from
Pump
freezing.
No
Detergent hose not properly
intake of
inserted into unit.
detergent
Soap injector hose cracked or split.
Wrong Nozzle.
Injector turned off.
Injection hose strainer clogged
Nozzle blocked.
Dried detergent in injector.
Water
Loose hose connection.
leaking
Worn, broken or missing O-ring.
at spray
gun/wand
connection
FOR TECHNICAL QUESTIONS, PLEASE CALL 1-855-888-3598
Possible Solutions
Check water supply hose for kinks,
leaks, or blockage. Open faucet all
the way.
Remove and clean filter screen.
Clean Nozzle (See "Cleaning
Nozzle" on Page 20).
Remove Nozzle and clean with
vinegar.
Check and tighten all connections.
Call customer service at:
1-855-888-3598.
Push firmly onto injector fitting.
Replace hose.
Switch to black SOAP nozzle.
Turn on injector
Clean hose and strainer.
Clean nozzle.
Dissolve by running warm water
through the injection hose. Run
clean water through injector until
clear.
Check and tighten all connections.
Call customer service at:
1-855-888-3598.
28
Publicidad
