Publicidad
Idiomas disponibles
Idiomas disponibles
GRILL COMPONENTS
6. Grill plate release button
7. Oil container
8. Lower shell assembly
9. Right shaft
10. Fixture
11. 180 Button >>press for positioning grill in 180 degrees mode<<
12. Sliding lock >>lock or set height<<
13. Right handle
14. Upper shell assembly
15. Handle
16. Left handle
REMOVE/INSTALL GRILL PLATES
Attention: Make sure the pan is cool before taking it out. If you have
just finished baking, you must use insulated gloves to prevent burns
1.Put the upper and lower grill plates of the whole machine at 105
degrees or 180 degrees, press the grill plate release button B, the grill
plate A will be released from the lock, and then take the grill plate out of
the fixture C, as shown in the figure above.
2.Assemble the grill plates, place the whole machine with the upper and
lower grill plates open at 105 degrees or 180 degress, insert the grill plate
A with the gaps at both ends, insert the grill plates fixture C, and then
place the grill plates on the reflective plate, press the grill plate A, when
you hear a click, the grill plate is assembled
8
Publicidad
