Descargar Imprimir esta página

ROYAL GOURMET PD1305H Manual Del Usuario página 5

Parrilla y plancha portátil de gas de 3 quemadores

Publicidad

Idiomas disponibles

Idiomas disponibles

General Information and Instructions
INSTRUCTIONS FOR USE
Follow the instructions carefully to avoid seriously damaging your griddle and causing injury to yourself and to property.
1. Assemble the griddle as per the assembly instructions carefully.
2. Connect the LP cylinder (not included) to the griddle.
3. REMOVE the hard cover. Turn all control knobs to the OFF position before turning on the gas supply to the griddle.
4. Operate the regulator in accordance with the instructions supplied with the regulator.
LP GAS AND CYLINDER INFORMATION
Your new gas griddle operates on LP (Liquified Petroleum) Gas. It is odorless, colorless, and non-toxic when produced.
You can smell LP gas as it has been given an odor similar to rotten eggs for your safety.
The LP cylinder used with your griddle must have two features:
1. An OPD (Overfill Protection Device) that prevents accidental gas leaks caused by
overfilling of the cylinder. Each cylinder contains a float that closes the input value
when the cylinder is 80
temperatures. A triangular hand wheel distinguishes this type of cylinder.
2. An QCC1 Type1 Quick Connect Valve that provides fast cylinder hook-ups and
requires only to be tightened by hand.
TRANSPORTATION AND STORAGE
1. The LP cylinder must include a collar to protect the gas supply valve.
2. Do not store a spare LP cylinder under or near the griddle.
3. Never fill the LP cylinder beyond 80% capacity.
4. If the warnings 2 and 3 above are not heeded exactly, a fire causing
death or serious injury may occur.
5. Always transport in an upright position.
6. Do not smoke when transporting your LP cylinder.
7. Place a dust cap on the cylinder gas valve outlet whenever the cylinder is not in use. Use only the type of dust
cap that is provided with the cylinder valve when purchased. Other types of cap or plugs may result in leakage
of propane.
CYLINDER SPECIFICATIONS
1. Cylinder purchased or exchanged for your gas griddle must be manufactured and marked in accordance with the
specifications for LP Gas cylinder of the U.S. Department of Transportation (DOT) or the National Standard of
Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods and
Commission, be equipped with a listed over-filling prevention device (OPD), and be equipped with a cylinder
connection device compatible with connection for outdoor cooking appliances.
2. The LP gas cylinder used for this appliance must not have a capacity exceeding 20 lb. (9.1 kg). Approximately
18" (45.7 cm) high and 12" (30.5 cm) diameter.
3. This griddle is designed to fit Worthington, Manchester, or SMPC brand 20 lb. (9.1 kg) cylinders. Other brands
may fit this griddle if the top collar and bottom support ring have similar dimensions.
THE CYLINDER MUST ALSO BE EQUIPPED WITH:
1. A shut-off valve terminating in a Type 1 gas cylinder valve outlet
2. A Type 1 valve that prevents gas flow until a positive seal is made
3. A collar to protect the cylinder shut-off valve
4. A safety relief device that is directly linked with the vapor space of the cylinder
% full. This allows room or the propane gas to expand in hot
Triangular Hand Wheel
Dust Cap
4

Publicidad

loading