Hart HPSI01 Manual Del Operador página 4

SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
Safety Alert
Read
Operator's
Manual
Eye Protection
Hot Surface
Recycle
Symbol
No Water
Volts
V
min Minutes
Direct Current
ASSEMBLY
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box.
WARNING:
Items in this Assembly section are not assembled to
the product by the manufacturer and require custom-
er installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
 If any parts are damaged or missing, please call
1-800-776-5191 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result in
serious personal injury.
DESIGNATION/EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's manual before
using this product.
Always wear eye protection with side shields marked to comply with ANSI Z87.1.
To reduce the risk of injury or damage, avoid contact with any hot surface.
This product uses lithium-ion (Li-ion) batteries. Local, state or federal laws may
prohibit disposal of batteries in ordinary trash. Consult your local waste authority
for information regarding available recycling and/or disposal options.
Do not place liquids or wet objects on top of the device.
Voltage
Time
Type or a characteristic of current
CONNECTING THE PEN HOLDER TO THE
SOLDERING IRON CONSOLE
See Figure 1, page 7.
 Slide the pen holder shaft into the hole in the console
4 – English
WARNING:
Do not attempt to modify this product or create ac-
cessories or attachments not recommended for use
with this product. Any such alteration or modification
is misuse and could result in a hazardous condition
leading to possible serious personal injury.
until it is fully seated.
NOTE: Once fully seated, the pen holder will be secure
in the housing, preventing the pen holder from being
removed.
NOTE: Do not grip pen holder to move the tool.