VEVOR PK001SS Manual Del Usuario página 10

ADDITIONAL INFORMATION
IN CASE OF AIR LEAKAGE
Please check the following if there is an air leak.
1. Have the upper cap closed?
2. Have the middle valve been tightened to the bleeder valve.
3. Repair Patches have been included for minor repairs. (Includes patches
and glue)
REPAIRING AN AIR LEAK
1. Wipe bed with mild soap water over area to find possible air leak.
DO NOT SUBMERGE MATTRESS IN WATER! If there is a leak bubbles
will form around leakage area.
2. Follow cleaning instructions for leak area.
3. Use included patch kit to cut a suitable sized patch for leak. Make sure
to round the edges of repair patch to avoid peeling.
4. Apply glue to patch area and around leakage area.
5. Press patch firmly over the puncture area.
6. Wait 24 hours before inflating. To prevent patch from peeling while
drying.
It is recommended to tape down patch edges with a light adhesive tape.
- 9 -