Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance and Cleaning
Before any work on the machine itself, pull the
I
mains plug.
Always keep the machine and the ventilation slots
I
clean for proper and safe working.
When the sanding plate is changed (see Changing the
Sanding Plate), check the sealing collar 10 for dam-
age. Have a damaged sealing collar replace by BTI
customer service.
WARNING
Important instructions for connecting a new 3-
pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
Strain relief
Live = brown
Neutral = blue
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
must be replaced, dispose of the old plug to prevent
misuse.
If the machine should fail despite the care taken in the
manufacture and testing, have the repair performed
exclusively by the BTI customer service.
For all inquires and replacement parts orders, please
include the article number on the nameplate of the ma-
chine in all cases.
3 609 929 A93 • (06.07) T
Disposal
Power tools, accessories, and packaging should be
disposed of for recycling in an environmentally friendly
manner.
Only for EU countries
Declaration of Conformity
To be fitted
We declare under our sole responsibility that this prod-
by qualified
professionals only
uct is in conformity with the following standards or
standardization documents:
EN 60745 according to the provisions of the directives
89/336/EEC, 98/37/EC.
Ulrich Delz
04.07.2006, BTI Befestigungstechnik Gmbh & Co. KG,
74653 Ingelfingen
Specifications subject to change without notice
English–6
Do not dispose of power tools in
household waste!
According to the European Guide Lines
2002/96/EC for waste electric and
electronic equipment and its imple-
mentation into national law, power
tools that are no longer usable must be
collected separately and recycled in an
environmentally friendly manner.
Günter Hub
Publicidad
