Descargar Imprimir esta página

Olsson and Brothers Stroot Manual De Instrucciones página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN
WARNING
Be sure to check that the steering system is properly adjusted and that all connec-
tion components are firmly secured and not broken before driving; refer to handlebar
mounting and safety instructions.
Read the operating guide and warnings for correct braking and use techniques.
Always wear shoes.
We strongly recommend that you always wear a helmet / goggles for your own
protection.
Self-locking nuts and other self-locking accessories may lose their effectiveness.
Not all parts and materials of the electric scooter can be changed; Modifications
are not allowed on the scooter. Doing so voids the warranty
If the electric scooter gets dirty, clean it with a damp cloth only; You cannot use pres-
surized water or running water, as this can cause damage to vital components.
Be sure to turn off the electric scooter while cleaning it, and be sure to cover the char-
ging inlet to avoid problems with the electronic components.
Be sure to dry the scooter with a towel, in case it gets wet.
Please note: Do not use alcohol, gasoline, kerosene, or other volatile or corrosive che-
mical components. This can damage both the appearance and the internal struc-
ture of the electric scooter.Store the electric scooter in a cool, dry environment when
not in use. Avoid leaving it outside as it is not intended to be stored in humid areas. It
is also not recommended to expose it to high temperatures caused by direct sunlight
for a long time.
HOW TO FOLD THE E-SCOOTER
Lift the front fork tube with your hand.
1
Lift the folding handlebar with one
hand and lift the front fork tube with
2
the other hand and you will hear a
"click".
Press firmly on the fold lock (the fold
3
lock can adjust the setting).
20
1
2
3

Publicidad

loading