Sunny ROW-N-RIDE PLUS Manual Del Usuario página 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
#22 d12 1PC
#23 M12 1PC
#19 M12 1PC
A S10 S13 S14
S15 S17 S19 1PC
B S13 S17 S19 1PC
19
1
#40 d8
#41 M8*25
#39 M12*151
C S5
39
6
#25
#27
#24
A
S15
C
24
11
6
22
23
2
1PC
1PC
1PC
2PCS
40
41
1
OD16*ID8.5 2PCS
M8*13 1PC
M8*65 1PC
S10 S13 S14
S17 S19 1PC
S5 1PC
25
25
27
2
STEP 3:
Remove the Bolt (No. 19), Washer（No. 22) and Nut
(No. 23) from the Main Frame（No. 1). Insert the Pedal
Connecting Tube (No. 2) into the Main Frame (No. 1).
Then insert Bolt (No. 19) into Main Frame (No. 1) and
secure the Washer (No. 22) and Nut (No. 23) using
Spanner (No. A & No. B).
STEP 4:
Remove the Bolt (No. 39), Washer (No. 40) and Screw
(No. 41) from the Main Frame (No. 1). Insert Seat
Connecting Tube (No. 6) into Main Frame (No. 1).
Then insert Bolt (No. 39) into Main Frame (No. 1), use
Allen Wrench (No. C) to hold the Bolt (No. 39) and use
the other Allen Wrench (No. C) to secure the Washer
(No. 40) and Screw (No. 41).
STEP 5:
Take out the 2 Washers (No. 25), Bolt (No. 24) and
Locknut (No. 27) from hardware package. Insert
Connecting Tube (No. 11) into the metal bracket slot
of Pedal Connecting Tube (No. 2). Tighten and
secure Bolt (No. 24), 2 Washers (No. 25) and
Locknut (No. 27) by using Spanner (No. A) and Allen
Wrench (No. C).
11