Yeyian DASH X24 Manual Del Usuario página 13

TECHNICAL SUPPORT
Problems
The power indicator does not
light up
Can't plug and play
The image is dim
Image flicker or a rippled
picture appears
The power indicator is on
(flashing), but there is no
image on the monitor
Lack of color (red, green,
blue)
The picture is not in the
middle or the size is not
suitable
The image has chromatic
aberration.(white does
not look white)
(FAQ)
*Check whether the power is turned on
*Check whether the power cord is connected
*Check whether the PC matches with plug and play
*Check whether the display card matches with plug and
play
*Adjust brightness and contrast
*There may be electrical equipment causing electronic
interference nearby
*Check whether computer power is on or not
*Check whether the computer graphics card is plugged in
*Check whether the signal cable of the monitor is
properly connected to the computer
*Check the display signal line
*Adjust the clock (CLOCK) or press the hot key (AUTO)
(VGA mode)
*Adjust RGB color or reselect color temperature
Possible Solutions