Yeyian DASH X24 Manual Del Usuario página 6

retained when the image is switched. In this case, the screen will slowly recover by
changing the image or turn off the power of the monitor every few hours.
5. When the screen turns black, flickers, or does not display an image, please
contact your dealer or service center to replace related accessories. Never replace
it yourself.
Cable connection:
Connection of the VGA Cable
Insert one end of the VGA cable into the monitor' s input port, and the other end to
the video output of your computer (dedicated or integrated video card).
Connecting the HDMI® Cable
Insert one end of the HDMI® cable into the monitor' s input port, and the other end
to the video output of your computer (dedicated or integrated video card).
Power Supply Connection
First, insert one end of the power supply cable into the power input jack of the
monitor, and the other end into the power outlet.
PRODUCT DESCRIPTION
Power Button
Used to turn the display on or off.
Power Indicator
When the monitor is working normally, the indicator light is green or blue. If the
monitor is in an energy-saving state, the indicator light is red or off, and the
indicator light is off when it is off. When the power indicator is off, it means the
monitor is off, but it must be noted that the power adapter is still powered on. For
safety, the power adapter should be disconnected when the monitor is not in use.
AUTO Button
When the OSD menu is active, this button acts as an exit key (to exit the OSD
menu). When accessing the VGA mode and the OSD menu is closed, press this