Bestop Sunrider 52461 Instrucciones Para La Instalación página 6

Section 4 Attach Sunrider Assembly To Vehicle
Screw, M8 X 50
Place an M8 X 50mm screw and a M8 washer
in the rear position.
Repeat this step on the left side of the vehicle.
P6 - 52461 Rev. M 0424
Turn the Sunrider assembly over then place it on the vehicle.
5mm Hex Key
M8 Washer
Installation Instructions - Sunrider for Hardtop
T50 Torx Driver
Replace the front bolt with the ones that were
removed in section 1
Page 6
© 2024 Bestop, Inc.