Melchioni Family MILKY Manual De Instrucciones página 19

Compact froth
Soft froth
To start the appliance, press the START/CANCEL button.
When the preparation is complete (from roughly one and two minutes), the impeller
stops (if it was rotating) and the LED indicators turn off. Wait 30 seconds before moving
the container or removing the lid, then pour the preparation into the desired container.
The appliance can be stopped at any time by pressing the START/CANCEL button.
After use, disconnect the electrical power cord and clean once all the parts have cooled.
Then stow the appliance in a clean and dry place.
6. CLEANING AND MAINTENANCE
The product does not require maintenance, or rather the replacement of consumable
parts or scheduled overhaul. As a rule, it is sufficient to clean the container and impeller
after every use, using common dish soap applied with a sponge and adequate rinsing.
Do not submerge the container and do not wash in the dishwasher. All cleaning must
absolutely be carried out with the power cord disconnected and, before reconnecting,
you must ensure that all parts are completely dry. Take particular care when handling
the impeller due to its delicate nature. At the end, dry the container with a dry cloth,
paying particular attention to the electrical contacts underneath.
In any case, avoid aggressive detergents, abrasive sponges, iron wool or other chemical
cleaners. For cleaning the body of the appliance, use a damp cloth only when completely
cold. Use only a dry cloth on the base.
7. RECOMMENDATIONS FOR BEST USE
The colder the milk,
the better it is.
Not all types of milk
produce froth.
Make froth with
flavour
Do not use the milk
frother
continuously.
75 – 150 ml
75 – 150 ml
Always use only milk or a milk alternative as cold and fresh as possible: millions
of tiny air bubbles, in fact, are formed during frothing. The longer the heating
time, the more air can be infused into the liquid, instantly improving the quality
of the froth and reducing the possibility of burns. Hot or lukewarm milk results
in poor frothing.
Whole milk produces a thick and creamy froth, whereas low-fat milk produces
larger bubbles and is preferable for cappuccinos. While almond, oat or soya milk
can produce froth even if frothed when hot, coconut milk produces froth only if
frothed when cold.
Before starting the appliance, flavourings can be added to the milk such as
cocoa, cinnamon, cardamom, nutmeg or others at will. The addition of highly
soluble flavourings is generally preferable.
After each use, let the appliance rest for at least two minutes before each new
preparation. Your milk frother will thank you, ensuring a longer service life and
less chance of malfunction.
This function is used to heat the milk and create a
dense, compact froth, ideal for a Cappuccino. It can
be used with cow's milk.
This function is used to heat the milk and create a
soft, airy froth, perfect for a Macchiato or Lattè. It
can be used with cow's milk.
18