Specific Safety Rules And Symbols - Hitachi H 90SE Manual De Instrucciones

English

SPECIFIC SAFETY RULES AND SYMBOLS

1. Hold tools by insulated gripping surfaces when performing an operation where the
tool may contact hidden wiring or its own cord. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock the operator.
2. Wear ear plugs when using the tool for extended periods. Prolonged exposure to high
intensity noise can cause hearing loss.
3. Never touch moving parts.
Never place your hands, fingers or other body parts near the power tool's moving
parts.
4. Never operate without all guards in place.
Never operate this power tool without all guards or safety features in place and in
proper working order. If maintenance or servicing requires the removal of a guard or
safety feature, be sure to replace the guard or safety feature before resuming operation
of the power tool.
5. Use right power tools.
Don't force a small power tool or attachment to do the job of a heavy-duty tool.
Don't use the power tool for purpose not intended —for example— don't use circular
saw for cutting tree limbs or logs.
6. Never use a power tool for applications other than those specified.
Never use a power tool for applications other than those specified in the Instruction
Manual.
7. Handle tool correctly.
Operate the power tool according to the instructions provided herein. Do not drop or
throw the power tool. Never allow the power tool to be operated by children, individuals
unfamiliar with its operation or unauthorized personnel.
8. Keep all screws, bolts and covers tightly in place.
Keep all screws, bolts, and plates tightly mounted. Check their condition periodically.
9. Do not use power tools if the plastic housing or handle is cracked.
Cracks in the power tool's housing or handle can lead to electric shock. Such power
tools should not be used until repaired.
10. Blades and accessories must be securely mounted to the power tool.
Prevent potential injuries to youself or others. Blades, cutting implements and
accessories which have been mounted to the power tool should be secure and tight.
11. Keep motor air vent clean.
The power tool's motor air vent must be kept clean so that air can freely flow at all
times. Check for dust build-up frequently.
12. Operate power tools at the rated voltage.
Operate the power tool at voltages specified on its nameplate.
If using the power tool at a higher voltage than the rated voltage, it will result in
abnormally fast motor revolution and may damage the unit and the motor may burn
out.
13. Never use the power tool which is defective or operating abnormally.
If the power tool appears to be operating unusually, making strange noises, or otherwise
appears defective, stop using it immediately and arrange for repairs by an authorized
service center.
14. Never leave the power tool running unattended. Turn power off.
Don't leave the power tool until it comes to a complete stop.
6