GE 20 Manual Del Propietario E Instalación página 21

Installation Instructions
REPLACING THE FREEZER DRAWER (onsome models)
Two people may be required to complete
this procedure.
m ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES
r_ Pull out the rail assemblies to the full length
on each side of the cabinet.
i _!
..... _k
j//
r_ Locate the slots on the inside of the rail
assemblies near the back.
Slot
Rail assembly
©
@
G
Insert the hooks at the back of the drawer
railings into the slots on the rail assemblies.
Lower the front of the drawer, making sure the
tabs on the sides of the railings fit into the front
slots in the rail assemblies.
Slot
F_ ATTACH AND SECURE THE DRAWER
FRONT TO THE SLIDES (cont.)
r_ Replace the screws on both rail assemblies.
\
Screw
[] REPLACE THE FREEZER BASKET
Replace the lower freezer basket by lowering it
into the frame.
21