Descargar Imprimir esta página

LIVARNO home 380181 2110 Instrucciones De Montaje, De Uso Y De Seguridad página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
LED Floor Lamp
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high
quality product. Please be sure to carefully
read all the instructions for use. Fold out the page with
illustrations. These instructions are part of the product
and contain important information on setup and han-
dling. Always observe all safety instructions. Before
using this product for the first time verify the correct
voltage and that all parts are properly installed. If
you have any questions or are unsure about operat-
ing the product, please contact your distributor or
service centre. Please keep these instructions in a safe
place and pass them on to third parties if necessary.
Intended use
This light is only suitable for indoor use
in dry and enclosed spaces. This product
is intended for private household use only.
This product is intended for normal operation.
Scope of delivery
Check that all the parts are present and that the appli-
ance is in perfect condition immediately after unpacking.
1 LED floor lamp, model (14162602L /
14162702L / 14162802L) (two-part)
1 Power supply
1 Base (14162802L)
2 Bases (14162602L / 14162702L)
2 Screws (14162602L / 14162702L)
4 Screws (14162802L)
1 Hexagonal key
1 Set of assembly instructions and usage instructions
Parts description
Lamp body
1
Mains lead
2
Base
3
Screws
4
Hexagonal key
5
Plug-in mains adapter
6
Touch button
7
Screws (14162802L)
8
Lamp arm (14162802L)
9
Plug-in connector (14162802L)
10
Technical data
Model no:
14162602L / 14162702L /
14162802L
Voltage:
230–240 V∼, 50 Hz
Rated power:
13.5 W
Protection class:
II /
LED module
Rated power:
LED, 10.5 W
Plug-in power supply
Type:
ANU-120100EU-R231
Input:
220–240 V∼, 50 / 60 Hz
Output:
12 V
Protection class:
II /
This product contains illuminants from energy
efficiency category „F".
Safety
Safety notices
Damage due to failure to comply with these instruc-
tions for use will void the warranty! We assume no
liability for consequential damages! We assume no
liability for property damage or personal injury due
to improper handling or failure to comply with the
safety instructions!
Introduction / Safety
1A max. 12 W
GB/IE
13

Publicidad

loading