Descargar Imprimir esta página

LEXIBOOK 4059026 Manual De Instrucciones página 23

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
Notes:
®
1. The Bluetooth
tower only connects to one device at a time.
2. The maximum transmission between the Bluetooth
10 meters or 32 feet.
3. Interference may occur during playback when using the Bluetooth
function near other wireless devices. If playback through Bluetooth
problematic, move the Bluetooth
different location, or use the 3.5mm LINE IN jack instead of the
®
Bluetooth
function.
Setting the Clock
1. Press the POWER button to turn off (standby mode) the tower.
2. Press the MEM/CLOCK button on the remote control.
3. The left digits blink. Press the TUN+/CLOCK+ or TUN-/CLOCK- button on the
remote control to set the hour.
4. Press MEM/CLOCK again to confirm the hour setting. The minutes
automatically blink.
5. Press the TUN+/CLOCK+ or TUN-/CLOCK- button to set the minutes.
6. Press MEM/CLOCK again to confirm the minute setting.
Setting the Alarm (with a preset radio station)
1. Press the POWER button to switch on the unit.
2. Press the SOURCE button repeatedly to select the FM mode.
3. Select a desired radio frequency by pressing the TUN+/CLOCK+ or TUN-/
CLOCK- button.
4. Press the POWER button to turn off (standby mode) the tower.
5. Press the ALARM button on the remote. The time on the LCD screen blinks.
6. The left digits blink. Press the TUN+/CLOCK+ or TUN-/CLOCK- button on the
remote control to set the hour.
7. Press ALARM to confirm the hour setting. The minutes automatically blink.
8. Press the TUN+/CLOCK+ or TUN-/CLOCK- button to set the minutes.
9. Press ALARM again to confirm the minute setting.
10. The alarm goes off with the preset radio frequency at the set time.
11. To deactivate the alarm, press the alarm button on the remote for 3 seconds.
The bell symbol disappears.
Setting the Timer
1. Press the POWER button to switch on the unit.
2. Press the SLEEP button repeatedly to select a preset timer: 5, 10, 15, 30, 60
or 90 minutes.
3. The LCD automatically enters sleep mode when the timer has been reached.
®
speaker and the playback device to a
CLOCK FUNCTIONS
22
®
speaker and a device is
®
®
is

Publicidad

loading

Este manual también es adecuado para:

Bt1000 serie