Demo Mode; Restoring The Factory Settings; Modes; Manual Cooking Modes - Hotpoint Ariston FH 103 0 IX/HA Manual De Instrucciones

! Once cooking has been completed, the cooling fan continues to operate
GB
until the oven has cooled down sufficiently.
Oven light
The light comes on when the oven door is opened or when a cooking mode
starts.
The icon can be used to switch on the light at any time.
Residual heat indicators
The appliance is fitted with a residual heat indicator. When the oven is off,
the "residual heat" bar on the display lights up to indicate high temperatures
inside the oven cavity. The individual segments of the bar switch off one by
one as the temperature inside the oven falls.

Demo mode

The oven can operate in the DEMO mode: all heating elements are
deactivated, and the controls remain operative.
To activate DEMO mode, press and release icon
" " simultaneously for 6 seconds, and then press and release icon
buzzer sounds and the TEMPERATURE display shows "dEon".
To deactivate DEMO mode, when the oven is off press and hold icon
and icon " " simultaneously for 3 seconds. A buzzer sounds and the "dEoF"
message disappears from the display.

Restoring the factory settings

The oven factory settings can be restored to reset all selections made by
the user (clock and customised durations). To carry out a reset, switch off
the oven, then press and hold the button corresponding to the first manual
cooking mode (top left) and the
Once the restore procedure is complete, a buzzer will sound. The first time
the icon is pressed, the oven will behave as if it is being switched on
for the first time.
Standby
This product complies with the requirements of the latest European Directive
on the limitation of power consumption of the standby mode. If no buttons
are pressed for 30 minutes and the control panel/door lock has not been
activated, the appliance automatically reverts to standby mode. Standby mode
is indicated by the high luminosity "Clock button" light. As soon as interaction
with the machine resumes, the system's operating mode is restored.

Modes

! Every time the oven is switched on, it suggests the first manual cooking mode.

Manual cooking modes

! All cooking modes have a default cooking temperature which may be
adjusted manually to a value between 30°C and 250°C as desired (300°C for
GRILL mode). Any temperature adjustments will be stored in the appliance
memory and suggested again the next time this mode is used. If the selected
temperature is lower than the temperature inside the oven, the text "Hot"
appears on the TEMPERATURE display. However, it will still be possible to
start cooking.
MULTILEVEL mode
All heating elements and the fan are activated. Since the heat remains constant
24
, then icons " " and
. A
icon simultaneously for 6 seconds.
throughout the oven, the air cooks and browns food in a uniform manner. A
maximum of two racks may be used at the same time.
BARBECUE mode
The top heating element and the rotisserie spit (where present) are activated.
The high and direct temperature of the grill is recommended for food which
requires a high surface temperature. Always cook in this mode with the oven
door closed (see "Practical cooking advice").
FAN GRILLING mode
The top heating element and the rotisserie spit (where present) are activated
and the fan begins to operate. During part of the cycle the circular heating
element is also activated. This combination of features increases the
effectiveness of the unidirectional thermal radiation provided by the heating
elements through the forced circulation of the air throughout the oven.
This helps prevent food from burning on the surface and allows the heat to
penetrate right into the food. Always cook in this mode with the oven door
closed (see "Practical cooking advice").
LOW TEMPERATURE modes
This type of cooking can be used for proving, defrosting, preparing yoghurt,
heating dishes at the required speed and slow cooking at low temperatures.
The temperature options are: 40, 65 and 90°C.
PIZZA modes
The top and circular heating elements switch on and the fan begins to operate.
This combination heats the oven rapidly. If you use more than one rack at a
time, switch the position of the dishes halfway through the cooking process.
BAKING mode
The rear heating element and the fan are switched on, thus guaranteeing the
distribution of heat in a delicate and uniform manner throughout the entire oven.
This mode is ideal for baking temperature sensitive foods (such as cakes,
which need to rise).
ECO mode
The back heating element is turned on and the fan starts working, ensuring
a smooth and uniform heat level inside the oven.
This programme is indicated for slow cooking of any type of food with
temperatures which can be set up to a maximum of 200°C; the programme
is also suitable for heating food and to complete the cooking process.
The programme is particularly suitable for the slow cooking of meat and fish, as
it allows you to have softer meat and save energy at the same time. For a better
energy effectiveness, when the product is turned on, the light stays on only
for 30 seconds; in order to turn the light back on, please press the
Rotisserie spit
! When
mode is on, the rotisserie will stop if the door is opened.
icon.
To operate the rotisserie function (see
diagram) proceed as follows:
1. Place the dripping pan in position 1.
2. Place the rotisserie support in
position 3 and insert the spit in the hole
provided on the back panel of the oven.
3. Start the rotisserie function by
selecting the or modes;