Maintenance And Care - Bruder Mannesmann Werkzeuge 17050 Manual De Instrucciones

Maintenance and care

The tool is virtually maintenance-free.
•
Occasionally clean the housing with a dry cloth.
•
Keep the hand grip and trigger dry and free of oil and grease.
•
Do not use solvents, as they might damage the housing.
•
Only have repairs carried out by an authorised repair workshop using original parts.
Full two-year guarantee
The guarantee period for your wall chasing machine begins on the day of purchase. Please supply proof of the
day of purchase by sending in the original receipt.
The guaranteed period covers the following:
•
Free removal of any faults.
•
Free replacement of defective parts.
•
Including free expert service (free assembly by our experts)
This guarantee is conditional upon the fault not being the result of improper handling.
If you have any queries or problems concerning quality, please contact the manufacturer:
Brüder Mannesmann Werkzeuge GmbH
Abt. Reparatur-Service
Lempstr. 24
42859 Remscheid, Germany
Tel.: +49 (2191) 37 14 71
Fax: +49 (2191) 38 64 77
Email: service@br-mannesmann.de
Discarding old electrical tools—environmental protection
•
If your tool has been so heavily used that it has become worn out and has to be replaced, or you have no
further use for it, you must turn the electrical tool in at a central recycling centre for disposal.
•
Please contact your community waste collection service or local authority to find out where you can hand in
your tool for recycling.
•
Electric tools contain valuable raw materials that can be recycled. You will contribute to recycling valuable
raw materials by handing your tool in at a central waste disposal centre.
•
Electric tools also contain substances that may be harmful to the environment and humans if disposed of
inappropriately.
•
The no-go sign with the dustbin means that you have a duty to take that article with the sign to be
recycled by a separate waste collection facility for electrical and electronic equipment.
GB - 10