Always read and observe the safety instructions included and this manual
before using electrical tools!
Additional safety instructions for cordless staple guns
This staple gun is used for stapling or nailing wooden strips, films, sheets of material, paper, cardboard, wire
mesh and so onto wood or other suitable base materials.
• Never point the tool at animals or people.
• Always check the tool before use, and have any damaged parts replaced by a qualified specialist.
• Never use different types of fastening material at the same time. Always make sure that fastening materials in
the magazine are of the same type.
• Never push the trigger lever down on an empty magazine.
• Wear eye protection when working with the electric staple gun.
• Remove all nails or staples from the magazine during longer work breaks or after finishing work.
• Do not use this staple gun for fastening electrical cables. It is not designed for electric cable installation and
may damage the insulation of electric cables thereby causing electric shock or fire hazards.
• Immediately stop using the staple gun if it is either faulty or not working properly, and bring it to an expert to
be checked over.
• Use the staple gun away from children, and keep it out of children's reach.
Tool description
(Fig. 1)
1. Battery charge indicator
2. Trigger
3. Handle
4. Loading socket
5. Magazine release button
6. Battery charger
7. Paper tacker
8. Refill indicator
9. Contact switch
Technical data
Voltage
Magazine capacity
Stapling/nailing rate
Suitable staple sizes
Suitable nail size
Sound pressure level (LPA)
(Uncertainty K = 3 dB)
Sound power level (LWA)
(Uncertainty K = 3 dB)
Vibration data
(Uncertainty K = 1,5 m/s²)
Cordless Staple Gun
Item No. 17050
Instruction Manual
Li-Ion battery 3,6 V, 1300 mAh
50 nails/staples
30 shots per minute
4-10 mm
10 mm
65,4 dB(A)
76,4 dB(A)
3,675 m/s²
GB - 7