Publicidad
Idiomas disponibles
Idiomas disponibles
Programmable Disc Title Memory
NOTE: A maximum total of 100 titles can be programmed into the unit.
The name of a Station, CD or AUX1 channel can be stored in memory using up to 10 characters as a title.
Title Memory
1. Select the mode you are going to be titling, (Tuner, CDP, CDX or AUX1). If in tuner mode, select the
station to be titled.
NOTE: The disc to be titled must be in the unit, either in CDP or CDX, and selected.
2. Press and hold the BAND button for 1 second and the first digit of the 10-digit front panel will begin to
blink.
3. Press the DISP button to cycle through the following character types:
Type 1: (space)ABCDEFGHIJKLMNOPQRSTUVWXYZ
Type 2: abcdefghijklmnopqrstuvwxyz
Type 3: 0123456789
Type 4: /\\.+?!*'")
4. Turn the VOLUME knob (Volume Outside) to select the proper
character.
5. Press the SELECT button (Volume Center) to move to the next space.
6. Press and hold the SELECT button (Volume Center) for 1
second to store the title into memory.
Title Erasing
1. Press and hold the MUTE button for 1 second.
2. Turn the VOLUME knob to select the title for erasing.
3. Press and hold the SELECT button (Volume Center) for 1
second to erase the title.
O
– T
PERATION
ITLE
Turn Outside
P
ROGRAMMING
Press Center
19
Publicidad
