Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
17.
To reduce the risk of injury associated with thrown objects:
• The blower operator must make sure that no bystanders or animals come nearer than 50 feet (15
meters). Whenever several operators are working in the same work area, they should maintain a safe
distance of at least 50 feet (15 meters) from one another;
• Watch out for children, pets, open windows, and blow debris safely away;
• Do not allow bystanders in work area;
• Always check to be sure that no debris has been blown onto someone else's property;
• Pay attention to the direction of the wind. Do not work against the wind;
• Never point a blower tube toward an open flame to avoid the possibility of igniting the unit, causing injury
to yourself or damage to surroundings.
18.
To minimize blowing time.
• Use rakes and brooms to loosen debris before blowing..
19.
The blower must not be used while on a ladder or scaffolding.
20.
Never put the machine down with the engine running.
21.
Ensure that the supply voltage coincides with that of the product (127/220 volts).
22.
Ensure that the circuit breaker is appropriate and supports the electric current generated by the equipment.
This device should be energized through a residual-current circuit breaker (RCCB) with a tripping current of
no more than 30mA.
23.
Never allow the glower to run without the blower tube.
24.
Severing of fingers or hand by fan blade. Do not open or remove safety guards or nets while engine is .
25.
To reduce the risk of fire and burn injury, do not use the blower near a fire, keep away from hot surface.
26.
Verify condition of the product's safety systems. In case of abnormalities, suspend the use and contact
SCHULZ AUTHORIZED DEALER for repairs.
27.
Never direct a high pressure air jet directly at another person or at the skin.
28.
Know how to stop quickly in an emergency.
29.
The symbol
means that the product has double insulation which provides greater protection against
electric shocks.
30.
Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If
you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible
injury.
31.
Besides the presented cares, consult the MAIN COMPONENTS chapter.
32.
If the power cord is damaged, it must be replaced by the manufacturer or a Schulz authorized technical
assistant, in order to avoid risks.
28
Publicidad
Tabla de contenido
