Publicidad
Idiomas disponibles
Idiomas disponibles
5.2 CONNECT AN ATTACHMENT TO THE POWER HEAD
Read and understand the entire Operator's Manual for each optional attachment
used on this power head and follow all warnings and instructions. Failure to follow
all instructions could result in electric shock, fire, and/or serious personal injury.
This Green Machine 62V power head (GMMT6200-PH) is designed to be used only
with the Green Machine attachments that are specified in this Operator's Manual.
The use of other unauthorized attachments could cause serious personal injuries or
property damage.
1. Remove the tube protection cap before installation.
2. Loosen the wing knob. (Fig.3A)
3. Align the installation hole on the attachment shaft with the arrow on the power
head shaft and push the attachment shaft into the power head shaft until you
hear a "click" sound, which means that the attachment shaft is mounted into
place. (Fig.3B)
4. Try to rotate or pull the shaft to ensure the installation is secure, if not secured
try to reassemble it from step 3.
5. Tighten the wing knob firmly.
2
Wing knob
1
Installation hole
F
. g i
3A
5.3 REMOVE THE ATTACHMENT FROM THE POWER HEAD
Never attach or adjust any attachment while the power head is running or with the
battery installed. Failure to stop the motor and remove the battery may cause
serious personal injury.
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob to release the shaft. (Fig.4A)
3. Press the shaft release button and then, pull the attachment shaft or extension
tube out from the power head shaft to remove it. (Fig.4B)
Page 12-English
2
1
Arrow
F
. g i
3B
GREEN MACHINE 62V CORDLESS POWERHEAD
F
. g i
4A
5.4 CONNECT AND ADJUST THE HARNESS
The harness gives maximum control during the operation of the product. The harness
decreases the risk of fatigue in your arms and back. Always use the harness for comfort-
able operation.
1. Place the harness on your person.
2. Press the locking clip to attach the harness to the harness support hook. (Fig.5A)
3. Adjust the length of the harness until the support hook is level with your right hip.
(Fig.5B)
Locking clip
Locking nut
F
. g i
5A
Detachment
This belt provides a quick-release mechanism.
1. Press both sides of the release button with one hand and pull the straps apart. The
machine can be released quickly from the operator in the event of an emergency (e.g.,
sparks, smoking, or vibrating abnormally). (Fig.4C)
F
. g i
4C
GREEN MACHINE 62V CORDLESS POWERHEAD
1
2
Shaft release button
F
. g i
4B
F
. g i
5B
Page 13-English
Publicidad
