Publicidad
Idiomas disponibles
Idiomas disponibles
Manual/Tilt Mode:
• Slide the pendulum switch to the Locked Position, press
and hold for ≥ 2 seconds to turn on the manual mode.
• The laser beam(s) will blink about every 3-5 seconds to notify the user
it is not self-leveling now.
• In manual mode, users can position the device at various angles.
Note:The laser beam(s) projected in manual mode cannot be used as a
horizontal or vertical reference in nature.
Pulse Mode (Use with Receiver)
Pulse Mode(Use with Receiver)
• Under pulse mode, Laser tool can work with a laser receiver for
working in a brighter environment or a larger working distance.
• Press
button and hold for ≥ 2 seconds to turn the Pulse Mode
on, the Pulse Mode Indicator(3) will light up. The laser beams are
dimmer in pulse mode.
• Press
button again and hold for ≥ 2 seconds to turn the Pulse
Mode on, the Pulse Mode Indicator(3) will light off. The laser beams will
be recovered.
Note:It is necessary to turn on the pulse mode when using with the
receiver.
-8-
button
Publicidad
