Huepar 7211CG Manual Del Usuario página 9

• When turn on the unit, the beam(s) is full brightness by default and
the Power Indicator(4) is off.
• Short press
will be on and flash as a reminder.
• Short press
Indicator(4) will be on and flash quickly.
Note: The brightness cannot be adjusted under pulse mode.
Turn OFF the laser tool:
If the laser tool is in self-leveling mode: Slide the pendulum to the
Locked Position to turn off the laser tool.
If the laser tool is in manual mode:
• Method 1: Slide the pendulum to the Unlocked Position, and then
slide the pendulum again to the Locked Position to turn off the laser
tool .
• Method 2: When the pendulum is in the Locked Position, press
button and hold for ≥ 2 seconds to turn off the laser tool.
• The Power Indicator(5) will light off when the laser tool turned off.
Note:The laser level can only be turned off when the pendulum/transit
in its Locked Position.
Self-leveling & Manual Mode
Self-leveling Mode:
• Be enabled when the pendulum/transit is switched to the unlocked
position.
• The laser beam(s) blink fast when tool is out of self-leveling range
(±3.5°).
Note: When working under self-leveling mode, please place this laser
tool on a level surface.
button to reduce the brightness. Power Indicator(4)
button again to reduce the brightness further. Power
-7-