Descargar Imprimir esta página

Levoit LV-H135-RWH Manual Del Usuario página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
EN
C A R E & M A I N T E N A N C E
Cleaning the Air Purifier
1.
Wipe the outside of the air purifier with
a dry cloth.
any other liquid, to avoid risk of electric
shock.
Clean the outside of the filter with a
2.
brush or vacuum hose each month
to prevent buildup of hair or dust.
not
clean the filter with water or other
liquids.
Cleaning the Sensor Cover
If the air quality indicator does not seem to
be accurate, clean the sensor cover.
1.
Remove the sensor cover.
Note: The sensor cover has a sponge inside to
protect the air quality sensor from large particles.
2.
Wipe the cover with a dry cloth. Wash
the sponge with clean water, then dry.
3.
Replace the sponge into the sensor
cover, and then replace the sensor
cover.
Note: Do not throw away the sponge. If the
sponge is not in the sensor cover, the air quality
sensor may not work correctly.
12
01.02_EML_LV-H135_ConsoleTrueHEPAAirPurifier.indd 12
01.02_EML_LV-H135_ConsoleTrueHEPAAirPurifier.indd 12
Do not
clean with water or
Do
[Figure
2.1]
Figure 2.1
Check Filter Indicator
will light up as a reminder to check the
filter. The indicator is automatic. You may
not need to replace your filter yet, but you
should check it when
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator when:
lights up.
1.
Replace the filter (see page 12).
2.
Turn on the air purifier.
Press and hold
3.
4.
The light will turn off after the filter
indicator is successfully reset.
The filter was changed before
Press and hold
1.
until
lights up.
2.
Press and hold
seconds.
The light will turn off after the filter
3.
indicator is successfully reset.
turns on.
for 3 seconds.
lit up.
for 3 seconds
again for 3
3/18/20 11:23 AM
3/18/20 11:23 AM

Publicidad

loading