Publicidad
Idiomas disponibles
Idiomas disponibles
CASTER INSTALLATION
1. Remove everything from the cabinet and lay the unit on its side on a clean,
dry, and padded surface.
2. Install casters into the holes on the bottom of the unit (as shown in the
picture below) and tighten screws with a screwdriver.
3. The two casters equipped with locks should be installed on the front of the
unit.
4. Once all four casters are attached, stand the fridge upright on the wheels,
making sure the fridge is still level.
5. Allow the unit to sit for 8-10 hours before plugging it in again. This allows
the refrigerant to settle again, preventing potential malfunctions.
www.newair.com
EN
12
Publicidad
