Dreame A1 Manual Del Usuario página 14

4. Pair A1 with your mobile device via Bluetooth.
Note: Make sure that your mobile device is within 10 m of A1.
2) Wi-Fi connection
Make sure A1 and your mobile device are on the same Wi-Fi network. Please follow the in-app guidance to
complete the connection.
Note: Please use a single-band network of 2.4 GHz frequency or dual-band network of 2.4/5 GHz frequency.
Note: You can also purchase the Link Module to remotely control A1 without Wi-Fi connection.
How to unbind A1?
A1 is automatically bound to the Dreamehome account once pairing is successful. Each device can only be
bound to one account. It cannot be bound to another account at the same time.
To pair A1 with a new account, you need to unbind it first. Please follow the steps below to unbind A1:
1. Go to "Device" in the app
2. Tap the name of your A1 on the upper left corner.
3. Tap "Delete" to unbind the device from the current account.
How to log out of your Dreamehome account or delete it?
To log out, go to Me > Settings > Account > Log Out. To delete the account, go to Me > Settings > Account
> Delete Account.
6 Map Your Garden
Before mapping, please check the following:
• The battery level of A1 is more than 50%.
• Protective cover of the LiDAR is removed.
EN 14