Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
If the "Connected" light does NOT flash green, another system may be in
the listening mode. Please exit the listening mode at the other system and then
try again.
• Green Flashing: In Listening Mode - system is ready to add RedLINK
devices.
• Green Steady: RedLINK devices are communicating.
• Red: RedLINK device(s) are NOT communicating. Check EIM and RedLINK
devices.
4.2b While the "Connected" light is flashing green on the EIM, press
the thermostat. After a short delay, the screen will show the thermostat
is connected.
4.3 When you see the prompt Do you have RedLINK accessories to
connect? Touch
• If you select YES, you will be prompted to Press Connect on all new
accessories. Continue to Step 4.4.
• If you select NO, continue to Step 4.5.
4.4 Connect each RedLINK accessory.
NOTE:
Make sure accessories are at least 2 feet away from the EIM during the
linking process.
4.4a While the Add Device screen is displayed (listening mode),
and quickly release
accessory.
Next
YES
or NO.
the CONNECT button on each new RedLINK
4
NEXT
on
press
Publicidad
