Hood Assembly - steel K Serie Manual De Uso

Hood assembly

• Rest the mounting bar "A" against the wall, at a height
determined by the sum of the 750 mm distance from the
cooktop + the "h" value relating to the relevant model of
hood.
• "Type K" hood:
• "Type AKL" hood:
• "Type GK" hood
• "Type AK" hood:
• Check the horizontal alignment with a spirit level and
mark the 2 holes to be drilled at the ends of the bar.
• Drill the holes, insert 2 x 8 mm dia. screw anchors, and
fasten the bar using the corresponding screws.
• Hook the range hood to the support bar.
• Adjust the alignment of the range hood using the
screws on the brackets. The top screw "B" adjust the
distance from the wall, the bottom screw "C" adjust the
height.
• Fasten the bottom of the hood to the wall with the
screws and two 6 mm bolts using the holes "F".
A
A A
h = 520 mm
h = 475 mm
h = 357 mm
h = 413 mm
A
A A
A
B
C
• For extractor hoods: connect pipe "E" (not supplied)
coming from the duct hole to union "D".
Installation 9
6 F
E
D